HorsePower Builds
Want more content like this?
Join the PowerNation Email NewsletterParts Used In This Episode
Currie Enterprises
Fabricated housing with LB Torino ends and 3" axle tubes, 3.75 gears and True-Trac differential, 31 spline performance axles, Back brace, leaf spring mounting pads, lower spring mounting plates and u-bolt kit.
Flaming River
Flaming River Universal Joints, Shaft Support Bearing, Patented Rack & Pinion Cradle, Mounting Clamp, Grade 8 Mounting Hardware, Manual Rack and Pinion.
Global West Suspension
Tubular upper and lower control arms with spindles and adjustable strut rods, Rear leaf springs with Rear Bushing and Shackle Kit using Del-a-lum bushings.
Trick Flow Specialties
Hydraulic roller camshaft, Hydraulic roller lifters, Roller rocker arms, Pushrods
Wilwood Engineering
DynaPro Lug Mount (DP) forged billet calipers and Rear Parking Brake Kit
Napa Auto Parts
Outer Tie Rod Ends 71-73 Mustang Non Power
Napa Auto Parts
Copper Tubing
O'Reilly Auto Parts
Head Bolt Kit 1/2" and 7/16" Kit Sets
O'Reilly Auto Parts
-6 Fuel Takeoff
O'Reilly Auto Parts
Fix-a-flat, Wire brushes, Pushon fitting
O'Reilly Auto Parts
Case of Brake Clean
O'Reilly Auto Parts
High Volume Oil Pump
O'Reilly Auto Parts
100 PK Razor Blades
Sensors, Inc.
EPA Certified Mobile Emisssions Testing.
Summit Racing
Engine Assembly, Short Block, Ford Boss 302 Stroker, 347 c.i.d.
YearOne
1968 Mustang fastback pre-welded reproduction body shell from Dynacorn.