More Haulin S-10 Episodes

Trucks! Builds

Parts Used In This Episode

Aerospace Components
Front disc brake setup, drag race version, aluminum hubs, aluminum calipers, drilled and slotted rotors, hardware.
Aerospace Components
Rear disc for Ford 9 inch big Ford bearing for S&W fabbed housing.
ATK Performance Engines
Engine block, prep work and final assembly.
Auto Meter
Carbon Fiber Series, 5" tach, mounting cup, 5" speedometer, volt, oil, water, boost, speedo sensor.
B&M Racing
Quarter Stick for reverse shift pattern.
Bowler Performance Transmissions
Turbo 400 and stall convertor, higher stall and trans brake installed.
Currie Enterprises
31 spline custom length axles.
Currie Enterprises
Detroit Locker, 4.56 gears.
Dupli-Color
VHT TrackBite traction tire treatment
Holley
750cfm blower specific carburetors.
Holley
Blower scoop.
Kundel
SnapTrac overhead bridge.
Loctite
Loctite thread locking compound.
Lunati
3.480 stroke forged 4340.
Lunati
6.00 H-beam rod 4340.
Mickey Thompson
15 X 14 5X4.5/5X4.75 3.5 B.S.E/T Drag Wheels.
Mickey Thompson
28 X 4.5-15 E/T Front.
Mickey Thompson
31 X 16.50 -15 E/T Street.
Mickey Thompson
Front Wheels 15 x 3.5.
MSD Ignition
6 BTM Ignition box.
MSD Ignition
Small diameter billet distributor.
MSD Ignition
Universal cut to fit Super Conductor.
S&W Race Cars
Aluminum spoiler kit.
S&W Race Cars
Bare axle housing.
S&W Race Cars
Four link tubes and hardware, welded rear frame section, wheel tubs.
S&W Race Cars
Ten point roll cage.
Summit Racing
Motive Gear ring and pinion set 5.29 ratio and basic install kit.
Trick Flow Specialties
215cc Trick Flow head 72cc combustion chamber.
Weiand
Polished 6-71 blower.